Category Wall


Recent Products
  • Jeep CJ HOOD/ Bonnet CJ5 CJ6 CJ7 CJ8 CJ10 – Reproduction – New #J5761180

    This is a brand new Hood for CJ’s Shipped from the USA its been sitting around for a couple of years, some minor surface scratches with no dents or creases
    Pick up would be preferred however shipping can be arranged at buyers costs

    Fits:

    • Jeep CJ-5 (1972-1983).
    • Jeep CJ-6 (1972-1975).
    • Jeep CJ-7 (1976-1986).
    • Jeep CJ-8 (1981-1986)
    • Jeep CJ-10 (1981-1985)
    $420.00
    Add to basket
  • Jeep CJ7, CJ8, CJ5 Steel Front Fender LHS – Reproduction – New by Crown Automotive # J5758618

    Replace those tattered front fenders with these replacements. Inner fender shields are pre-assembled and ready to go. Compare the price of a new fender against the high cost of repairing a dented or rusty one.

    Steel fenders are pre-drilled, primed and will require finishing.

    Pick up would be preferred however shipping can be arranged at buyers costs

    Fits:

    • Jeep CJ-5 (1975-1983).
    • Jeep CJ-6 (1972-1975).
    • Jeep CJ-7 (1976-1986).
    • Jeep CJ-8 (1981-1986).

    These do NOT fit 1972-1975 CJ-5  CJ6 vehicles. These are the “transition years” vehicles, and while they look the same from the outside, the inner fenders are not the same. If you want to use these on a 1972-1975 CJ-5 OR 6 , you will have to modify the inner fender.

    $350.00
    Add to basket
  • Jeep CJ7, CJ8, CJ5 Steel Front Fender RHS – Reproduction – New by Crown Automotive # J5758964

    Replace those tattered front fenders with these replacements. Inner fender shields are pre-assembled and ready to go. Compare the price of a new fender against the high cost of repairing a dented or rusty one.

    Steel fenders are pre-drilled, primed and will require finishing.

    Pick up would be preferred however shipping can be arranged at buyers costs

    Fits:

    • Jeep CJ-5 (1975-1983).
    • Jeep CJ-6 (1972-1975).
    • Jeep CJ-7 (1976-1986).
    • Jeep CJ-8 (1981-1986).

    These do NOT fit 1972-1975 CJ-5  CJ6 vehicles. These are the “transition years” vehicles, and while they look the same from the outside, the inner fenders are not the same. If you want to use these on a 1972-1975 CJ-5 OR 6 , you will have to modify the inner fender.

    $350.00
    Add to basket
  • Brand: AMC

     Jeep CJ7 Original Factory Roll bar in green – Preowned

    The Jeep CJ-7 featured a wheelbase 10 inches longer than that of the CJ5 with its curved side entry cutouts partially squared up to accommodate hinged doors. The other main difference between CJ-5 and CJ-7 was to the chassis, which consisted of two parallel longitudinal main c-section rails. To help improve vehicle handling and stability, the rear section of the chassis stepped out to allow the springs and shock absorbers to be mounted closer to the outside of the body. It was introduced for the 1976 model year, with 379,299 built during 11 years of production

    Pick up would be preferred however shipping can be arranged at buyers costs

    Fits:

    CJ7 -1976-1982
    CJ8 1976-1983

    $300.00
    Add to basket
  • Brand: AMC

    Jeep CJ7 1980 -1981 Frame Narrow Track Chassis – restored

    We often hear how anyone can build a Jeep if he/she can just find a good solid frame to start with. Everything else may be available, but frames usually are rusted beyond repair or have crash damage, and a good used frame is hard to find.  Here is your chance to pick up and almost new CJ7 80-81 Frame. The frame has been restored to factory condition, ready for your next project.

    $1,570.00
    Add to basket
  • Brand: Omix Ada

    Jeep CJ Light Grey Dash Pad fits 1976 – 1986 CJ5 CJ7 CJ8 CJ10 Scrambler – New

    Id never seen one in Light Grey until this week, the finish is nice its brand new NOS> the white Jeep Logo on the dash pad has stil got its protective sticky paper on it. Its very tidy A1 condition.

    Fits:

    • Jeep CJ-5 1976 – 1983
    • Jeep CJ-7 1976 – 1986
    • Jeep CJ-8 1981 – 1985
    • Jeep CJ10 1981 – 1985

    $355.00
    Add to basket
  • Brand: Willys

    Jeep Willy’s Pick Up or Wagon – Instrument Surround and Guages Vintage – Preowned

    Out of a 1955 Willys Pick up truck, this deco instrument surround is chrome plated, in good condition for its age. All the guages are avaliable or sold seperate. Surround asking $155, all guages together another $150. You will find the Fuel and Oil pressure guages are together and the AMP and Temp guages are one. Speedo seperate.

    Fuel/Oil Guage $75

    AMP/ Temp Guage $75

    Speedo $70

    $355.00
    Add to basket
  • Brand: Willys

    Jeep Willy’s pickup truck Fuel Tank  – Preowned Green Needs repair to bottom can be saved.

    $50.00
    Add to basket
  • Brand: Jeep

     Jeep WJ Grand Cherokee Front Door Speakers 6″x9″ #56038409AB Preowned – Sold as Pair

    Premium Sound Infinity system

    (Radio unit with external amplifier and six Infinity 4-ohm speakers. Mopar 10-disc CD changer standard with most Infinity systems)


    6×9″ Infinity woofers

    P/N 56038409AB

    superseded by
    P/N 56038409AC

    superseded by
    P/N 5081669AA
    P/N 5081669AB

    $100.00
    Add to basket
  • Brand: AMC

    Jeep Hand Brake Cable 61″ long – Preowned

    Jeep Handbrake cable from the foot pedal or lever action long cable

    $61.00
    Add to basket
  • Brand: AMC

    Jeep Hand Brake Cable 67″ long – Preowned

    Jeep Handbrake cable from the foot pedal or lever action long cable

    $67.00
    Add to basket
  • Brand: AMC

    Jeep Hand Brake Cable 71 5/8″ long – Preowned

    Jeep Handbrake cable from the foot pedal or lever action long cable

    $95.00
    Add to basket

Top Rated
  • Brand: Uneek 4x4
    • ADR compliant and air bag compatible
    • High clearance bar for maximum approach angle offroad
    • Ability to run large tyres with out rubbing on the bar. Up to 36″ tyres with out rubbing.
    • Light weight yet strong steel design (only 42kg.) Made out of 4,5 and 20mm Steel
    • 20mm heavy duty steel tow hooks
    • Hi-lift jacking points integrated into bar
    • Winch compatable (most popular winches, including warn high mount winch)
    • Full width bar that meets factory flares
    • Fully welded grill guard to protect radiator made out of HD 3.2mm thick tube
    • Factory fog lights integrated into the bar
    • Mounting points for radio antenna and driving lamps
    • Easy fitment – once factory bumper is removed, fit in 20min
    • Can be colour matched upon request (not included in this price)
    • Optional bolt on winch delete plate to cover hole in the top of the bull bar when winch is not going to be fitted
    • Optional high mount winch plate allows fitment of Warn High Mount Winch. Contact us for this option.
    • Optional added tubes for more kangaroo protection or no tubes at all.
    5 out of 5
    $1,425.00
    Add to basket
  • Brand: Jeep

     

     

    $75.00
    Add to basket
  • Brand: Jeep

    Jeep TJ Wrangler RHS Door Seal Full Door 50170463AF

    • Part Number – D3012 (Replaces 50170463AF)
    • Make(s) – Jeep
    • Model(s) – Wrangler
    • Submodel(s) – TJ
    • Year Range Fitment – 1997-2006
    • Part Description – Door Seal Full Door
    • Location(s)  – Drivers side RHD RHS
    • Number Of Parts – 1
    $115.00
    Read more
  • Brand: Pro Comp
    • ProComp lighting has the highest available IP rating of 68 – they are completely waterproof, dustproof, shockproof and UV-shielded
    • ProComp promises that its products will last a lifetime or they will replace it free of charge. This warranty is 100% transferable between owners and their vehicles. There’s no need for receipts or proof of purchase.
    • Double Row Light Bar
    • Mounting Type: Universal
    • Beam Pattern: Flood/Spot/comp
    • 37.75 x 3.23 x 3.51 inches overall
    • Colour: Clear
    • 80 Cree LEDs
    • 180 Watts
    • 6063 Extruded Aluminium Housing
    • Shock Resistant
    • Waterproof
    • 14400 Raw Lumens.

     

    $1,104.00 $650.00
    Add to basket
  • Brand: Pro Comp
    • Lights sold individually.
    • Finish: Black
    • 100 watt light features special shock absorbing rubber gaskets around the lens
    • Double rub anti-vibration mounts
    • Wiring is protected by flexible metal conduit.
    • Lifetime Warranty. Pro Comp warranties its full line of products to be free from defects in workmanship and materials for the life of the product.
    $58.00 $35.00
    Add to basket
  • Brand: Jeep

     

     

    $25.00
    Add to basket
  • Brand: Smittybilt
    • 402 Stainless Blade
    • Nylon Handle
    • 3 Tools In One
    • D-Ring Slot
    • 19mm Hex
    • Survival Kit
    • Built-In Compass
    • Protective Sheath

     

     

    $85.00
    Read more
  • Brand: Jeep

     

     

    1 out of 5
    $50.00
    Add to basket
  • Brand: Jeep

     

     

    $40.00
    Add to basket

OXY IS A EXTREME POWERFUL & FLUID RESPONSIVE OPENCART THEME WITH HUNDREDS OPTIONS!
BUILT BY PROFESSIONALS FOR PROFESSIONALS! BUY THIS THEME!