FSJ Cherokee

Jeep CJ Mechanical Fuel Pump by Crown Automotive J3228191

comes with 2 gaskets and the Fuel Pump new in box

Fits Jeep:

• Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine; w/ Rear Inlet Fitting.
• Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine; Severe Use; Export only.

Fits Vintage Jeep:

• Jeep CJ (1983-1986) w/ 2.5L AMC engine.
• Jeep CJ (1977-1978) w/ 3.8L engine.
• Jeep CJ-5 (1977-1983) w/ 4.2L engine; w/ 2 Barrel Carburetor.
• Jeep CJ-7 (1977-1986) w/ 4.2L engine; w/ 2 Barrel Carburetor.
• Jeep CJ-8 (1981-1986) w/ 4.2L engine.
• Jeep SJ & J-Series (1977-1986) w/ 4.2L engine; w/ 2 Barrel Carburetor.

Jeep CJ SJ J Series Fuel Sending Unit O-Ring #J0941521

Fits:

• Jeep CJ (1969-1986).
• Jeep J-Series (1962-1986).
• Jeep SJ (1981-1991).
• Fuel Sending Unit O-Ring for J5357373 and J5362090.

 Jeep CJ10 Adaptor by Marks adaptors Dana 300 to TH350

The kit was designed for the TH350 gear box to a dana 300 transfer case

This part is part of an MFK118 kit adpator and Shaft included will not seperate

Adaptor $555

Shaft $286.15

It would have been more than 20 years since that kit was even sold so It might not have been manufactured for even longer . A Rare item for the elite restorer.

• Jeep CJ-7 (1980-1986)
• Jeep CJ-8 (1981-1986)
• Jeep CJ-10 (1981-1986)

Jeep CJ10 Flywheel Ring Gear by Crown Automotive #J3179741 CJ YJ TJ XJ MJ C104 SJ J Series NEW

New Condition in original packaging

• Engine: 4.0L (S6-242),4.2L (S6-258) 
• Manual Transmission

Fits Jeep:

• Jeep Wrangler (TJ) (1997-2006) w/ 4.0L engine.
• Jeep Wrangler (YJ) (1991-1995) w/ 4.0L engine.
• Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine.
• Jeep Cherokee (XJ) (1987-2001) w/ 4.0L engine.
• Jeep Comanche (MJ) (1987-1992) w/ 4.0L engine.

Fits Vintage Jeep:

• Jeep CJ-5 (1972-1978) w/ 3.8L engine.
• Jeep CJ-6 (1972-1975) w/ 3.8L engine.
• Jeep CJ-7 (1976-1978) w/ 3.8L engine.
• Jeep CJ-5 (1972-1983) w/ 4.2L engine.
• Jeep CJ-6 (1972-1975) w/ 4.2L engine.
• Jeep CJ-7 (1976-1986) w/ 4.2L engine.
• Jeep CJ-8 (1981-1986) w/ 4.2L engine.
• Jeep CJ-5 (1971-1981) w/ 5.0L engine.
• Jeep CJ-6 (1971-1975) w/ 5.0L engine.
• Jeep CJ-7 (1976-1981) w/ 5.0L engine.
• Jeep CJ-8 (1981) w/ 5.0L engine.
• Jeep C104 Commando (1972-1973) w/ 4.2L or 5.0L engine.
• Jeep SJ & J-Series (1972-1979) w/ 3.8L engine.
• Jeep SJ & J-Series (1972-1986) w/ 4.2L engine.
• Jeep SJ & J-Series (1970-1986) w/ 5.9L engine.
• Jeep SJ & J-Series (1971-1979) w/ 6.6L engine.
• Flywheel Ring Gear; 164 Teeth.

Crown Automotive # 33004065 Motorcraft Ignition Module for 76-87 Jeep CJ & Wrangler YJ with 2.5L or 4.2L Engine, 84-85 Cherokee XJ with 2.5L Engine & 78-86 SJ & J Series with 4.2L or 5.9L Engine

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.

Crown Automotive #J3231347 Oil pressure switch fits 4.2L or 5.0L with 3 Terminals or SJ/ J Series 1979-1981

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.

Jeep Gladiator Wagoneer Vintage Pie Pans – Preowned & Restored

Jeep  Gladiator & Wagoneer Pie Pans for the Rhino Grill. Hard to find these days in good condition. we have a small collection just released into the restorers market, they wont last long. Some have been restored by Jeep City, some are good enough to go out as they are . 3 -4 pairs are available will not seperate sold in pairs

Fits:

1962 -1969 Jeep Gladiator w/Rhino Grill

1962-1969 Jeep Wagonner w/Rhino Grill

Anything with Rhino Grill

Jeep SJ Fuel Sending Unit (1970-1979 ) Cherokee & Wagoneer Only By Crown Automotive #J5361468

Fuel Sending Unit in tank made of metal and plastic by Crown Automotive

Jeep SJ Fuel Sending Unit (1980-1985 ) Cherokee & Wagoneer ONLY #J5363490

Fuel Sending Unit in tank made of metal and plastic by Crown Automotive

Not for J Series Trucks or Pickups

Does Not Include Gasket

1973-1985 Jeep SJ and J Series Temperature Control Cable – New 53″ with Twist Lock

Jeep CJ 1941-1986 Tie Rod End LH Thread RHS by Crown Automotive #J8136674 New

Fits ;

Jeep CJ (1941-1986); w/ Left Hand Thread

CJ-5,CJ-6,CJ-7,CJ-8,C104,MB,CJ-2A,CJ-3A,CJ-3B,FC-150,FC-170,SJ,J-Series,C101,Willys Pickup,Willys Sta. Wgn.,Willys Sedan Del.

Jeep CJ 1941-1986 Tie Rod End RH Thread LHS by Crown Automotive #J8136600 New

Fits ;

Jeep CJ (1941-1986); w/ Right hand Thread

CJ-5,CJ-6,CJ-7,CJ-8,C104,MB,CJ-2A,CJ-3A,CJ-3B,FC-150,FC-170,SJ,J-Series,C101,Willys Pickup,Willys Sta. Wgn.,Willys Sedan Del.

Jeep CJ SJ J Series Spindle Bearing Kit Crown Automotive #J8127356

Fits:

• Jeep CJ (1977-1986).
• Jeep SJ & J-Series (1977-1991).

Jeep CJ SJ J Series XJ TJ YJ WJ WG Timing Cover gasket by Crown Automotive J3225187

CJ,WG,SJ,J-Series,XJ,MJ,ZJ,YJ,TJ,ZG,WJ,CJ-5,CJ-7,CJ-8,CJ-6,C104

Jeep CJ Tie Rod End by Crown Automotive #J8124817

SPECS : Left Hand Tie Rod 22mm OD shaft

Taper shaft 19mm to 17mm

greaseable unit

Fits:

• Jeep SJ & J-Series (1974-1991); to Left Knuckle; also to Pitman Arm.
• HOLDEN overlander -confirmed.
• Jeep CJ10 1981-1985

Jeep Distributor Cap SJ J Series Willys FC170 by Crown Automotive J0931674 – New
Fits:

Jeep SJ & J-Series (1962-1965) w/ 6-230 engine.
Jeep Pickup (1954-1962) w/ 6-226 engine; w/ Distributor Tag: IAT-4404A or IAT-4206B.
Jeep Pickup (1962-1965) w/ 6-230 engine; w/ Distributor Tag: IAT-4411 or IAT-4416.
Jeep FC-170 (1957-1964) w/ 6-226 engine; w/ Distributor Tag: IAT-4404A or IAT-4206B.

Jeep FSJ Grand Wagoneer 1974-1991 Roof Rack Grommets J4003120

A direct replacement to fit the Grand Wagoneer ( FSJ, SJ )with OE Style Roof Rack grommets that are the insulating grommets that hold a T-25 torx-head screw. The Screws mount,hold & secure the roof rack uprights for the rails.

This Direct Fit 12-Piece Grommet Set Is What Seals The 12-Holes In Your Roof & Prevents Any Water & Moisture From Ever Getting Inside & Sealing Off The Roof So It Does Not Cause Any Water Damage.

Do you Sagging Headliner Board Assembly-This Is Almost Always The Cause Because The Old Ones Dried Out Over Time & Possibly Even Fell In & Stopped Sealing One Or More Of Those 12-Holes In Your Roof.

This 12-Piece Direct Fit Roof Rack Grommet Set is a good fit for all Grand Wagoneers , FSJ and SJ Cherokees from 1974-1991 $3.60 each – 12 Needed for the Set, sold as set of 12, $3.60 each total $43.20 ( 12-piece stainless steel roof rack torx head screws not included however are available on our website)

Jeep FSJ Grand Wagoneer 1974-1991 Roof Rack SS Torx Screws J4006401 Set of 12 ( $3.56 each)

A direct replacement to fit the Grand Wagoneer ( FSJ, SJ )with OE Style Roof Rack T-25 torx-head screw. The Screws mount,hold & secure the roof rack uprights for the rails and go into the Grommet.

This 12-Piece Direct Fit Roof Rack SS Screw Set is ther perfect fit for the Roof Rack Grommets (sold seperately) for Grand Wagoneers , FSJ and SJ Cherokees from 1974-1991.

$3.56 each – 12 Needed for the Set. 12-piece stainless steel roof rack torx head screws available now sold as set.