Jeep CJ SJ J Series Fuel Sending Unit O-Ring #J0941521

Fits:

• Jeep CJ (1969-1986).
• Jeep J-Series (1962-1986).
• Jeep SJ (1981-1991).
• Fuel Sending Unit O-Ring for J5357373 and J5362090.

 Jeep CJ10 Adaptor by Marks adaptors Dana 300 to TH350

The kit was designed for the TH350 gear box to a dana 300 transfer case

This part is part of an MFK118 kit adpator and Shaft included will not seperate

Adaptor $555

Shaft $286.15

It would have been more than 20 years since that kit was even sold so It might not have been manufactured for even longer . A Rare item for the elite restorer.

• Jeep CJ-7 (1980-1986)
• Jeep CJ-8 (1981-1986)
• Jeep CJ-10 (1981-1986)

Jeep CJ10 Converter Drive Plate by Crown Automotive #3232138 CJ5 CJ7 CJ8 SJ J Series YJ

New in packaging

with 258 Engine 4.2L

Fits:

• Jeep CJ-5 (1980-1983) w/ 4.2L or 5.0L engine; w/ A999 Automatic Transmission.
• Jeep CJ-7 (1980-1986) w/ 4.2L or 5.0L engine; w/ A999 Automatic Transmission.
• Jeep CJ-8 (1981-1986) w/ 4.2L or 5.0L engine; w/ A999 Automatic Transmission.
• Jeep SJ & J-Series (1981-1983) w/ 4.2L engine; w/ A904 or A999 Automatic Transmission.
• Jeep Wrangler (YJ) (1987) w/ 4.2L engine; w/ A999 Automatic Transmission.
• Flexplate; 164 Teeth.

Crown Automotive # 33004065 Motorcraft Ignition Module for 76-87 Jeep CJ & Wrangler YJ with 2.5L or 4.2L Engine, 84-85 Cherokee XJ with 2.5L Engine & 78-86 SJ & J Series with 4.2L or 5.9L Engine

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.

Crown Automotive #J3231347 Oil pressure switch fits 4.2L or 5.0L with 3 Terminals or SJ/ J Series 1979-1981

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.

Crown Automotive # 52078134 Shift Control Bearing 

• Transfer Case: NP/NV242,NP/NV231

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.
• Fits Jeep:
  • Jeep Wrangler (TJ) (1997-2001); Transfer Case Control.
  • Jeep Wrangler (YJ) (1987-1995); Transfer Case Control.
  • Jeep Cherokee (XJ) (1984-2001) w/ NP231 or NP242 Transfer Case; Transfer Case Control.
  • Jeep Comanche (MJ) (1986-1992) w/ NP231 Transfer Case; Transfer Case Control.
  • Jeep Grand Cherokee (ZJ) (1993-1998) w/ NP242 Transfer Case; Transfer Case Control.

  Fits Vintage Jeep:

  • Jeep CJ-5 (1981-1983) w/ Automatic Transmission; Transmission Control.
  • Jeep CJ-7 (1981-1986) w/ Automatic Transmission; Transmission Control.
  • Jeep CJ-5 (1981-1986) w/ Automatic Transmission; Transmission Control.
  • Jeep SJ & J-Series (1981-1991) w/ Automatic Transmission; Transmission Control.

Jeep Gladiator Wagoneer Vintage Pie Pans – Preowned & Restored

Jeep  Gladiator & Wagoneer Pie Pans for the Rhino Grill. Hard to find these days in good condition. we have a small collection just released into the restorers market, they wont last long. Some have been restored by Jeep City, some are good enough to go out as they are . 3 -4 pairs are available will not seperate sold in pairs

Fits:

1962 -1969 Jeep Gladiator w/Rhino Grill

1962-1969 Jeep Wagonner w/Rhino Grill

Anything with Rhino Grill

Jeep J Series Truck (1974-1979 ) Fuel Sending Unit in tank #J5357677

Fuel Sending Unit in tank made of metal and plastic by Crown Automotive

Not for SJ Cherokee or wagoneer

Does Not Include Gasket

1973-1985 Jeep SJ and J Series Temperature Control Cable – New 53″ with Twist Lock

Jeep CJ SJ J Series XJ TJ YJ WJ WG Timing Cover gasket by Crown Automotive J3225187

CJ,WG,SJ,J-Series,XJ,MJ,ZJ,YJ,TJ,ZG,WJ,CJ-5,CJ-7,CJ-8,CJ-6,C104

Jeep J Series FSJ SJ Front Fender RHS & LHS made from Fibreglass
Jeep SJ FSJ Wagoneer J Series Truck widetrack fenders avaliable @$265 each

Can ship Australia wide and also international. Contact us via email at jeepcity@bigpond.net.au for more information or quotes for overseas freighting

Red Molds in pictures not included
Black Guards in pictures representing likenesses in Jeep model fenders , displayed with JK and TJ Flares for demonstration purpose only not included

 Jeep CJ10 CJ 1978-1986 Mudflaps Splash Guards Reproductions

One of the harder things to find these days for your restoration on a CJ is the original AMC style mudflaps or Splash Guards as they call them in the USA. Jeep City now has access to full sets of Jeep AMC style Mud Flaps front and rear that look and feel just like the originals.  Limited stock coming soon. be sure to secure your set now or available for preorder. Sold as a set only 2 – Front and 2- Rear ( avaliable from the 6th of March 2019)

Fits :

• Jeep CJ10, 1981-1985
• Jeep CJ8 1980-1986
• Jeep CJ7 1978-1984
• Jeep CJ5 1978-1985

The Smittybilt Scout Offroad Trailer Kit RRP $13995.00

Smittybilt thought of everything with their new Scout Trailer. Starting with a fully boxed galvanized steel frame which is then powder coated with the under carriage featuring heavy-duty undercoating. A 50mm receiver is located at the rear of the trailer to allow the use of hitch mounted accessories. Three off-road jacks make the Scout easy to unhook and level. Electric axle brakes in conjunction with a self-charging trailer breakaway system provide the ultimate security in the event of trailer detachment and meet trailer brake laws in all 50 states. The independent trailing arm suspension features coil springs, dual shocks and limit straps that are both simple and reliable while providing a smooth ride. The galvanized 14-gauge powder coated tub has a large main compartment and two side cabinets meaning that you will never run out of space again. The side cabinets make a perfect spot to fit your generator or a camp kitchen, with easy access and locking t-handles. Removable steel fenders accommodate almost any size tire and an aluminum tongue box is perfect for deep cycle batteries and electrical systems. Below the instant-up tent (optional) by the main cabinet of the Scout houses dual sliding floors with four tie down points per slider and dual locking T-handles. Rain gutter rails allow for even further mounting of rack systems to carry your kayaks, bicycles, or whatever toys you want bring along on your next backcountry journey.