XJ Cherokee

Crown Automotive # 52078134 Shift Control Bearing 

• Transfer Case: NP/NV242,NP/NV231

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.
• Fits Jeep:
  • Jeep Wrangler (TJ) (1997-2001); Transfer Case Control.
  • Jeep Wrangler (YJ) (1987-1995); Transfer Case Control.
  • Jeep Cherokee (XJ) (1984-2001) w/ NP231 or NP242 Transfer Case; Transfer Case Control.
  • Jeep Comanche (MJ) (1986-1992) w/ NP231 Transfer Case; Transfer Case Control.
  • Jeep Grand Cherokee (ZJ) (1993-1998) w/ NP242 Transfer Case; Transfer Case Control.

  Fits Vintage Jeep:

  • Jeep CJ-5 (1981-1983) w/ Automatic Transmission; Transmission Control.
  • Jeep CJ-7 (1981-1986) w/ Automatic Transmission; Transmission Control.
  • Jeep CJ-5 (1981-1986) w/ Automatic Transmission; Transmission Control.
  • Jeep SJ & J-Series (1981-1991) w/ Automatic Transmission; Transmission Control.

• Mounting Type: Universal
• Beam Pattern: Flood
• Color: Clear
• Amp Draw: 1.36/12V 0.68/24V
• 20 Watts
• 3.25wx3.75hx3.1d
• 3800 Polyester Powder Coat
• Shock Resistant
• Raw Lumens: 1,830 Per Light
• Pair Pack.

Jeep  … Engine Oil Filter Adaptor Seal MOPAR 4720363 fits 97-01 Jeep Cherokee  XJ  or 1993-1998 Grand Cherokee ZG

Jeep TJ XJ ZJ ZG MJ Currie Currectlync Heavy-Duty Tie Rod System – CE-9701

The Currie Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1-1/4 inch diameter forged alloy drag link, and 1-1/4 inch solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.

• 1-1/4 inch Chromemoly
• 1-1/8 inch Threaded Drag Link Adjuster and Giant Clamps
• 7/8 inch Threaded Tie Rod Ends

Fits:

97-06 TJ Wrangler

84-01 XJ Cherokee

93-98 ZJ ZG Grand Cherokee

84-96 MJ Comanche

Jeep TJ XJ ZG Rugged Ridge Heavy-Duty Tie Rod/Drag Link Kit – 18050.82

Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch OD steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles. Will not work with Right Hand Drive vehicles. Will not work with factory Rubicon wheels or wheels with a flat style face. Not recommended for vehicles with over 4 inch of lift. Not compatible with smaller OEM steel wheels or wheels with deep backspacing. Not recommended for vehicles with under 2 inch of suspension lift.

• 4.0L 6 cylinder engine
• Includes 4 tie rod ends, 2 rods and steering damper bracket
• 1.25 inch OD SAE
• .25 inch wall thickness
• Complete kit

97-06 TJ Wrangler

84-01 XJ Cherokee

93-98 ZJ ZG Grand Cherokee

• 55 watt
• Includes 12-foot coiled power cord that plugs into any 12V cigarette lighter receptacle
• Available in high-impact black ABS housing with built-in handle and rear on/off switch
• Length with handle: 10.25″ Lens diameter: 5″ Depth: 2.25″.

• Universal builder part
• 5/8” hardware
• Welding required.

• Super-Flex Joint Assembly
• Small
• 1/2 in. ID Ball.

• Universal builder part
• 3/4” hardware
• Welding required.

• Fits early style Rubicon Express arms
• Upper Control Arm Small Bushing
• Rubber
• For 10mm Bolt
• Need Press To Install.

• Fits Jeep XJ Cherokee, TJ Wrangler and Grand Cherokee 93-98
• Lower control arm bushing
• Lower Large Bushing
• Rubber
• OEM style replacement.

• For Small Super Flex Joint
• Rebuild Kit
• Small Race
• Fits upper control arms
• Sold As Pair.

• For Large Super Flex Joint
• Sold As: Pair.

• ProComp lighting has the highest available IP rating of 68 – they are completely waterproof, dustproof, shockproof and UV-shielded.
• ProComp promises that its products will last a lifetime or they will replace it free of charge. This warranty is 100% transferable between owners and their vehicles. There’s no need for receipts or proof of purchase.

• Single Row Light Bar
• Mounting Type: Universal
• Beam Pattern: Flood/Spot/comp
• 49.625 x 1.614 x 3.327 inches overall
• Colour: Clear
• 48 LEDs
• 172.8 Watts
• Beam Distance 1123
• 6063 Extruded Aluminium Housing
• 15360 Raw Lumens.

• ProComp lighting has the highest available IP rating of 68 – they are completely waterproof, dustproof, shockproof and UV-shielded
• ProComp promises that its products will last a lifetime or they will replace it free of charge. This warranty is 100% transferable between owners and their vehicles. There’s no need for receipts or proof of purchase.
• Lights sold individually
• Finish: Black
• Quartz/halogen 130 watt H3 bulb
• 8″ diameter-ideal for driving and spot needs
• Specially fluted lens and highly polished reflector deliver long range brightness plus even distribution.

• Lights sold individually.
• Finish: Black
• 100 watt light features special shock absorbing rubber gaskets around the lens
• Double rub anti-vibration mounts
• Wiring is protected by flexible metal conduit.
• Lifetime Warranty. Pro Comp warranties its full line of products to be free from defects in workmanship and materials for the life of the product.

• Lights sold individually.
• Finish: Chrome
• 100 watt light features special shock absorbing rubber gaskets around the lens
• Double rub anti-vibration mounts
• Wiring is protected by flexible metal conduit.