Jeep Parts - Vintage (Pre 1985)

Jeep Cherokee Wagoner FSJ SJ Front Bumper Chrome with Bumperettes

A great piece brackets included

Can be shipped

Jeep CJ Mechanical Fuel Pump by Crown Automotive J3228191

comes with 2 gaskets and the Fuel Pump new in box

Fits Jeep:

• Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine; w/ Rear Inlet Fitting.
• Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine; Severe Use; Export only.

Fits Vintage Jeep:

• Jeep CJ (1983-1986) w/ 2.5L AMC engine.
• Jeep CJ (1977-1978) w/ 3.8L engine.
• Jeep CJ-5 (1977-1983) w/ 4.2L engine; w/ 2 Barrel Carburetor.
• Jeep CJ-7 (1977-1986) w/ 4.2L engine; w/ 2 Barrel Carburetor.
• Jeep CJ-8 (1981-1986) w/ 4.2L engine.
• Jeep SJ & J-Series (1977-1986) w/ 4.2L engine; w/ 2 Barrel Carburetor.

 Jeep CJ10 Adaptor by Marks adaptors Dana 300 to TH350

The kit was designed for the TH350 gear box to a dana 300 transfer case

This part is part of an MFK118 kit adpator and Shaft included will not seperate

Adaptor $555

Shaft $286.15

It would have been more than 20 years since that kit was even sold so It might not have been manufactured for even longer . A Rare item for the elite restorer.

• Jeep CJ-7 (1980-1986)
• Jeep CJ-8 (1981-1986)
• Jeep CJ-10 (1981-1986)

Jeep CJ10 Flywheel Ring Gear by Crown Automotive #J3179741 CJ YJ TJ XJ MJ C104 SJ J Series NEW

New Condition in original packaging

• Engine: 4.0L (S6-242),4.2L (S6-258) 
• Manual Transmission

Fits Jeep:

• Jeep Wrangler (TJ) (1997-2006) w/ 4.0L engine.
• Jeep Wrangler (YJ) (1991-1995) w/ 4.0L engine.
• Jeep Wrangler (YJ) (1987-1990) w/ 4.2L engine.
• Jeep Cherokee (XJ) (1987-2001) w/ 4.0L engine.
• Jeep Comanche (MJ) (1987-1992) w/ 4.0L engine.

Fits Vintage Jeep:

• Jeep CJ-5 (1972-1978) w/ 3.8L engine.
• Jeep CJ-6 (1972-1975) w/ 3.8L engine.
• Jeep CJ-7 (1976-1978) w/ 3.8L engine.
• Jeep CJ-5 (1972-1983) w/ 4.2L engine.
• Jeep CJ-6 (1972-1975) w/ 4.2L engine.
• Jeep CJ-7 (1976-1986) w/ 4.2L engine.
• Jeep CJ-8 (1981-1986) w/ 4.2L engine.
• Jeep CJ-5 (1971-1981) w/ 5.0L engine.
• Jeep CJ-6 (1971-1975) w/ 5.0L engine.
• Jeep CJ-7 (1976-1981) w/ 5.0L engine.
• Jeep CJ-8 (1981) w/ 5.0L engine.
• Jeep C104 Commando (1972-1973) w/ 4.2L or 5.0L engine.
• Jeep SJ & J-Series (1972-1979) w/ 3.8L engine.
• Jeep SJ & J-Series (1972-1986) w/ 4.2L engine.
• Jeep SJ & J-Series (1970-1986) w/ 5.9L engine.
• Jeep SJ & J-Series (1971-1979) w/ 6.6L engine.
• Flywheel Ring Gear; 164 Teeth.

Jeep CJ10 Hood Safety Hook & Bracket 1981-1986 Black Preowned

Restored and painted gloss black

Fits:

• Jeep CJ-7 (1980-1986)
• Jeep CJ-8 (1981-1986)
• Jeep CJ-10 (1981-1986)

Jeep CJ5 CJ7 CJ8 CJ10 Black Stainless Steel hood/Bonnet Set 50470 – New

Not only can your Jeep stand out from the crowd with this eye-catching Stainless Steel Hood Set from Kentrol, but it also can have a lifetime of rust-free looks and a fit that is guaranteed on your CJ or YJ Wrangler. This Kentrol Hood Set is made from mirror finished T-304 stainless steel which is stamped, drilled, machined and welded to achieve performance perfection as well as a beautiful fit. The hinges and hood vents are even slightly oversized to precisely cover any pain seams or exposed body primer when installed. Even the mounting hardware is high quality stainless steel so you know what you buy is is the highest quality around and the ultimate in durability.

Crown Automotive #J8134270 Brake Master Cylinder Jeep CJ (1978-1986) with Manual Brakes.

CJ-5,CJ-7,CJ-8

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.
• Fits  Jeep CJ (1978-1986) with Manual Brakes.

Crown Automotive # 33004065 Motorcraft Ignition Module for 76-87 Jeep CJ & Wrangler YJ with 2.5L or 4.2L Engine, 84-85 Cherokee XJ with 2.5L Engine & 78-86 SJ & J Series with 4.2L or 5.9L Engine

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.

Crown Automotive #927417 Steering Wheel Black 927417 CJ3B CJ5 CJ6 FC150

• With over 9,000 different parts in stock for Jeep® vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep® vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts.
• The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components.
• Crown Automotive also offers an exclusive line of component kits and accessory products.
• 1963 -1968 CJ3B
• 1963-1971 CJ5
• 1963-1971 CJ6
• 1963-1964 FC150
• The above with 2-3/8″ horn button.

Jeep Gladiator Wagoneer Vintage Pie Pans – Preowned & Restored

Jeep  Gladiator & Wagoneer Pie Pans for the Rhino Grill. Hard to find these days in good condition. we have a small collection just released into the restorers market, they wont last long. Some have been restored by Jeep City, some are good enough to go out as they are . 3 -4 pairs are available will not seperate sold in pairs

Fits:

1962 -1969 Jeep Gladiator w/Rhino Grill

1962-1969 Jeep Wagonner w/Rhino Grill

Anything with Rhino Grill

In good condition ready for restoration or use it as is. 1955 / 56 Willy’s Pick up Cab green in colour everything has been removed, so if any items in these pictures are not included its just the cab. All other parts could still be available. please contact us for any additional items you might need for your restoration project.

In good condition ready for restoration or use it as is. 1955 / 56 Willy’s window winder mechanism left or right sides available email us your enquiry to sales@jeepcity.com.au

Willys Jeep Vintage Front Bumper with brackets RaT rOd style

Willys Jeep Vintage Front Bumper, off a pickup or Wagon from the 50’s to mid 60’s this bumper is in good solid condition; surface rust not worth sanding off, use it as is on your hot rod rat rod project !

As Is has bracket that form part of the bumper, see pictures for detail.

Can be shipped

Willys Jeep Vintage Tool Box Lid, in reasonable for its age, can be cleaned up and repaired or use for Rat Rod Style. Rust is the new Black

Ross Steering Box , includes Tube and steering gear, Pit man arm attached.  Early Jeep Steering box in good condition will need a rebuild. Hard to find Vintage part.

Part Numbers Box – T122969 2 M Cover – T125998  Pitman Arm 647136

Fits MB GPW CJ2A CJ3A CJ3B CJ5/6

Ross Steering Box , includes Tube and steering gear, Pit man arm attached.  Early Jeep Steering box in good condition will need a rebuild. Hard to find Vintage part.

Part Numbers Box – T122983 3 B

Cover – T125098 W 8 M

Fits MB GPW CJ2A CJ3A CJ3B CJ5/6 Willys L226

Ross Steering Box , includes Tube and steering gear, Pit man arm attached.  Early Jeep Steering box in good condition will need a rebuild. Hard to find Vintage part.

Part Numbers Box – T122983 3 B

Cover – T125996W 10 M

Pitman 647136 WM

Fits MB GPW CJ2A CJ3A CJ3B CJ5/6 Willys L226