Chief Products WK2 Lower Front Guard is engineered to protect the critical components at the lower front of your WK2, without ruining your Jeep’s good looks. Weighing only 15kg (approx.) when fully installed, it provides off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Best of all, we’ve designed the WK2 Lower Front Guard so it installs behind the removable lower front fascia, providing full protection off-road while still allowing you to maintain a factory appearance on-road.
We spent more than 1 year in development getting every detail just right. We performed months of on-road and off-road testing, putting the WK2 Lower Front Guard through numerous challenges, as well as nearly a dozen test fits on various WK2 models. That passionate attention-to-detail led to numerous refinements that increased ease-of-installation, lowered weight, maximised performance and increased strength. We even designed the WK2 Lower Front Guard to be as economical to ship as possible, which significantly reduces associated shipping costs as well as the environmental impact.
High-Strength 350 Grade Steel
E-Coat (Industry Leading Corrosion Resistance)
Durable Powder Coat Finish (Textured Black)
Easy Installation (Difficulty = 4/10)
Standard Guard = 14.90kg (Including Mounting Hardware)
ACC Guard = 15.20kg (Including Mounting Hardware)
Approach Angle = Same As Stock
1 – Centre Section (5mm High-Strength Steel)
2 – Chassis Mounting Brackets
2 – Corner Mounting Brackets
2 – Corner Guards
1 – Standard Guard or ACC Guard
1 – Air Dam Reinforcement Bracket
4 – M6 Chief Products Bolt Head Protectors – Slotted (Aluminium 5083)
2 – M8 Chief Products Bolt Head Protectors – Slotted (Aluminium 5083)
4 – M10 x 20mm High Tensile (10.9) Bolts (Zinc Plated)
2 – M8 x 100mm High Tensile (10.9) Bolts (Zinc Plated)
2 – M8 x 30mm High Tensile (8.8) Bolts (Zinc Plated)
14 – M8 x 25mm High Tensile (8.8) Bolts (Black Zinc Plated)
4 – M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated)
4 – M10 Wedge-Lock Extended Washers (Zinc Flake Coating)
18 – M8 Wedge-Lock Extended Washers (Zinc Flake Coating)
4 – M6 Wedge-Lock Extended Washers (Zinc Flake Coating)
2 – M8 x 8mm Bushings (6061 Aluminium)
4 – M6 Nutserts (Stainless Steel)
1 – 4g pouch Anti-Seize
Off-road protection for the Lower Radiator Core, ACC Camera, Windshield Washer Bottle and Air Suspension Controller. Accomplished via high-strength 350 grade steel that is 5mm thick on the main centre section.
Maintain OEM Appearance
The lower front fascia can be easily installed over the WK2 Lower Front Guard, maintaining the great looks of the Jeep Grand Cherokee while driving around town. Then when you’re heading off-road, you can easily remove the lower front fascia via (5) 1/4 turn fasteners to reveal the WK2 Lower Front Guard.
Low Installed Weight
Only 15kg (approx.) when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) – 90kgs (steel).
Maximum Approach Angle
Since our design doesn’t extend past the front of your WK2, the maximum approach angle is retained.
Compatible With Excellent Front Recovery Options
Can be installed with OEM Tow Hooks (if available for your WK2) or Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg [1.5 GVM]).
Easily & Inexpensively Repaired
Because we designed the WK2 Lower Front Guard as a set of components, if you damage one part, you can easily and cost effectively replace just that part.
Significantly less expensive than a Bull Bar, especially when you include shipping and installation costs.
Easy To Install
We provide easy-to-follow step-by-step instructions. If you’re half-way decent with a wrench you can install this yourself.
Industry Leading Corrosion Protection
We utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process.
Bolt Head Protection
Our Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.
Real World Testing
There aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing Touches
We include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great.